Inspection Ports

Inspection routines dictate repetitive inspection at the surface of the pipe/vessel at the same location, ULVA’s silicone inspection ports allow the work to be undertaken without the need to disturb the insulation or cladding.

The inspector can open the water tight plug and remove the section of insulation inside to gain access to the surface of the pipe. Following inspection, the insulation is replaced and the plug closed, reinstating the waterproofing integrity of the system.

Inspection ports are adhered to the surface of the ULVAShield and ULVAGRP utilising ULVASeal.

Ulva Insulation Systems Ltd Countering corrosion under insulation (c.u.i)