Inspection Ports

Where inspection routines dictate repetitive inspection at the surface of the pipe at the same location, ULVA’s silicone inspection ports allows the work to be undertaken without the need to disturb the insulation or cladding.

The inspector can open the water tight plug and remove the section of insulation inside to gain access to the surface of the pipe. Following inspection, the insulation is replaced and the plug closed, reinstating the waterproofing integrity of the system.

Inspection ports are adhered to the surface of the ULVAShield and ULVAGRP utilising ULVASeal.

Latest news

  • Helang Sailaway

    Posted on: 21 Aug 2019

    The Helang FPSO, completed by Chinese Cosco Shipping (Qidong) Offshore in eastern...


Ulva Insulation Systems Ltd Countering corrosion under insulation (c.u.i)